GPL 205G0 Keyboard Lube-3.5ml/0.28oz Syringe Pure PFPE/PTFE Grease Lubricant for Mechanical Keyboard Linear & Tactile Switches, Stabilizers, and Springs

The go-to lube for keyboards in a easy-to-use applicator that works well and provides even distribution.

This really made a difference with my switches. The sound is far less clangy and have a more muted sound that is far, far more pleasant. For this, I had to use the provided syringe tips to get the lube down into the switch as I was unable to remove the switches (soldered to the pcb) and therefore couldn't take it apart. This method is not recommended, but it was the only method available to me and it worked. Just don't put TOO much in the switch and make sure to hit it from a few different sides. My luck is that it came with the tips for getting into the switches that way.

Great Lube for switches, made switch a lot smoother to type on and have been feeling great for over a year.

I purchased this lube for a new full size keyboard build. I wanted to do a mixed switch board where the main board consisted of Tealios v2 switches, the F keys as Holy Pandas and the number pad on the right with Holy Panda Drop X Black. All 5 pin switches, so in wanted to do a thorough job. This stuff is much better than the lube that came with a kit I purchased came with (wish I would’ve used this on that board too). Anyone familiar with Teal Tealios v2 knows of the infamous scratchy feeling when pressing the key down. This lube made them so much smoother that they are comparable to Varmilo EC Sakura switches feeling. The noise is helped, but filming the switches is what really helps with that. So far I’ve run this keyboard exclusively and there’s been no decline in performance. A little goes a long way when lubing switches. Again, A LITTLE GOES A LONG WAY WHEN LUBING SWITCHES. This tube will get you through lubing at least 3-5 keyboards depending on the size and that’s with lubing every switch. I’d highly recommend if you are wanting to do a custom keyboard or even hot swapping switches to a 3 or 5 pin board. Really a great value and a brand that many people recommend.

Great lube so far! It was nice to have the small syringe heads too. I used this on a squeaky ROG Ally X trigger button. Fixed the issue flawlessly!

Had some Akko rosewood switches that sounded a bit scratchy and could hear light pings from the spring. Just out a small bit along the sides of the stem and it worked like magic. Rosewoods sound beautiful now!

After a bit of research I chose this to get the applicator syringes as a package. I used it on stabilizers on a pre-assembled/soldered board. It did make a slight improvement on the 'rattle' that is characteristic of stabilizers, and without the hassle of disassembly. As a medium-body PTFE grease it sticks in place well and flows smoothly. It seems to be non-conductive. In about 6 months I can determine if it resists liquification common to many formulas of grease products.

Ordered 7.5ml, received a 7ml instead, otherwise the product's great and the attachments are great for lubing my stabilizers easily