VEVOR 60 Gallon Sandblasting Cabinet, 40-120PSI Sand Blasting Cabinet with Stand, Heavy Duty Steel Sand Blaster with Blasting Gun & 4 Ceramic Nozzles for Paint, Stain, Rust Removal

Good Construction, easy installation. Seems to work very well. Suggest hearing protection, very noisy.

I mounted this to the typical HF cabinet. It replaced a ShopVac/dust deputy setup that worked but lost suction fairly quickly. I use medium crushed glass media.1. Yes, it's loud (wear hearing protection)2. You'll have to clean the filter (Remove it and knock out the dust) after about every hour of use.3. It moves a ton of air when the filter is clean and will suck up media. Dump the media out of the bottom before cleaning out the filter so you can put that back in the cabinet without the dust.4. It's not a miracle cure, it still requires maintenance but when it's working it's a lot better than a regular ShopVac.5. I'm sure the included filter is letting some very fine dust through it, You can tell when it's running. If you are sensitive to that then just wear a dust mask when in use.

It sucks ok but it is loud!

Please don’t buy this if you’re trying to keep a clean shop. This thing blows sand all over and the most annoying thing is the way it’s designed to mount on the HF cabinet it blows sand right at your face. I made a small plexiglass shield but am deciding instead of making a million mods to it to just send it back. I was hopeful it was going to make my sand blasting experience better and easier but it’s not even fun to use because of the mess it makes. I gave it a fair shot I promise. I was using 100 grit alum-oxide media. Just not built for that type of stuff I guess.

This cabinet does as advertised, but the assembly process and instructions leave a lot to be desired. There are so many bolts and PC parts to put together. It is really better as a multiperson job.Many of the parts came slightly warped or bent, which made the assembly process a lot more difficult than it needed to be as you had to force bolt holes to line up due to damage on the items. It actually says in the instructions to expect some parts to be bent, which is why I didn’t send it back.The included light is OK but I would only rate it a five out of 10 because it’s not very bright. I bought a magnetic LED light to replace it with.The instructions failed to mention several parts that come with the kit and what you’re supposed to do with them so you kinda have to figure it out on your own.I would say it’s on par with a harbor freight quality cabinet although I have bought one from Harbor freight and had a lot less grief putting it together.

The only downside is that it's SUPER loud. But the benefit is you'll save so much media by using this instead of nothing or a shop vac. All you have to do to recover the media it vacuumed up is open the bottom of the chute and pour the media into a container. It even has a little spring loaded plunger that knocks the media off the filter.As with any of these kinds of products, I might have just got lucky. But I've bought quite a few Vevor products and have yet to get a dud. They actually do seem to make good products that are way cheaper, just like they say.

Well built. Did some upgrades and went with a better feed valve at the bottom instead of the draw tube it comes with. Also put a air regulator on it. Pay attention how it goes together. Put the top on wrong and had to take it apart again.

Functional great,just bolt on I can see what i am doing now .