🔧 Unleash Your Inner Tech Guru with LEAGY!
The LEAGY 4 In 1 Network Cable Tester is a versatile tool designed for testing RJ-45, RJ-11, USB, and BNC cables. With a testing range of up to 300 feet, it features an ergonomic design, audible alerts, and a low battery indicator, making it an essential device for professionals who demand efficiency and reliability in their networking tasks.
| Manufacturer | LEAGY |
| Part Number | part1950 |
| Package Dimensions | 21 x 11 x 4 cm; 10 g |
| Item model number | part1950 |
| Colour | Grey |
| Style | Modern |
| Power Source | Battery Powered |
| Item Package Quantity | 1 |
| Certification | eia/tia |
| Batteries included? | No |
| Batteries Required? | No |
| Item Weight | 10 g |
M**E
Easy to use
Good tester as it shows crossover etc, quick and easy to use.
M**.
Does what it's supposed to do.
No problem testing USB and RJ45 cables. All good.
M**E
Arrived faulty
Faulty
A**E
Identifed the faults on my cat 6 sockets
Easy to use just pop in a pp3 battery and put the remote sensor on one end and the unit on the other and press go to see which connection is faulty. Identified a fault on two wires...I must have nicked the orange and blue and white wires when stripping the outer pvc sheath on my cat 6 cabling. Re did the connections taking care not to strip the outer sheath too deep and all fine.
P**N
LEAGY 4 In 1 Network Cable Tester does what it says
Arrived on time and well packaged. Seems solid and well made. I put in a battery, it was a very tight fit but it did go in with a bit of a fiddle and I did a test on a cable that I knew was OK. It checked out the cable and all the LEDs lit up as expected, if a little on the bright side.Now I have not checked it out on a cable that I know to be faulty, that is something to think about, must give it a try.
M**L
OK as a spare.
Decent value but few issues. If the connection is fine then all is well but if there's a cross pair or missing ect it tells you there is a cross or an open but not which pin it is on. OK for a back up but no good for repairs or fault finding.
P**D
Indispensable
wiring connectors for my PoE cameras looked simple but would have been a disaster until I invested in this product and could quickly check continuity across all 8 wires
S**E
Really not much use
If you do have a fault on a cable, this tester will only tell you there's a short or something is crossed not which cores. It also give some very strange reading depending which end of the cable you test from. Really not much use.
Trustpilot
2 weeks ago
2 weeks ago
