Sundance Spas Heater Flow Switch W/Tee, 6560-857

Works great so far

Had an issue with my Caldera spa where the water would not heat up, and I had suspected it was the flow switch due to the "blinking" temperature light on the main panel. While the caldera spa uses a heater with a built-in flow switch, I was fortunate enough that it still used a separate signal to the main board. I was able to avoid having to purchase a brand new heater kit, and instead put this inline after the heater and plugged it right into the flow switch header on the Caldera main board.Been running about a year now and no issues!

Solved the problem with my heater that had a bad pressure switch - I saved hundreds of dollars with this product!!

I was able to use this instead of replacing the heater with integrated pressure switch. Huge savings.

It’s the part I needed to fix my hot tub. It arrived quickly

Nothing

The clear plastic housing was missing a fitting for a small tube. Basically I have 3 Outputs. I ended up taking the switch out of this housing and putting it in my old housing. I have a 2010 Sundance Maxxus Tub. If you have to do this, make sure you note the way the switch is in the housing and duplicate its position. Or the switch will not work if ts put in backwards. Easy fix, just reverse it. The switch itself looks the same as the original I had. Same part numbers on the switch. Location of the switch is at the front, right corner or right of the radio. Super easy to change. Hardest part was removing the pins on the plug. If your in question, Youtube has a video to show you.

What's there to write? The hot tub wouldn't be hot, the mechanic identified the culprit, we ordered this part, had it built in, and voila we can enjoy splashing in the tub again. :)