Heavy Duty TV Wall Mount for 45-100 inch Large TVs up to 200 LBS & 800x600 mm Vesa, Ultra Slim Fixed TV Mount, Low-Profile TVS Bracket, 16" 24" 32" Wood Stud, Fit Most 65+ 75+ 85 86 90 98 100 TVs

My new TV is much heavier than other LCD TVs I've owned due to its massive 100" size. It weighs over 100lbs and I wanted to make sure it stayed on the wall. I also wanted to make sure it was as close to the wall as possible. This mounting kit is strong and has thicker metal than kits I've used in the past for smaller TV's. The kit included lag screws for mounting on standard wood framed and drywall type walls. I located the wood studs and mounted the base bracket. The kit included a thick paper template and simple level for locating and marking your holes so that you don't have to hold up the heavy bracket itself and I found that quite handy. I was able to tape the template up and view it, making sure it's where I wanted it. The TV brackets were also simple to install. My TV has an uneven back but HiSense put a VESA spacer on the thinner part of the TV to make it even for brackets. If your TV doesn't have this, the kit includes multiple M8 screw lengths and plasctic spacers for getting it right. I used a couple saw horses to rest the TV on next to the wall before the final lift. The TV was heavy even for two people. Engaging the TV hardware to the wall hardware was straightforward and not much different than hanging a painting. Once the top was "hooked" on, the TV snapped into place as the bottom "hook" mechanism engaged, preventing the TV from casually coming back off the wall. One thing I noticed is that for a 100" TV, the pull cords that release the bracket when you need to remove the TV from the wall, were rather short and the wall gap was not enough for me to get my hands up in there. You might want to lengthen the lanyards with strong twine or in my case, some long zip tie loops. Sliding the TV side to side to adjust the center position was fairly easy with a little force after it was clipped in. Overall, this is a good and sturdy kit for larger TVs and IA found the price reasonable and economical when compared to other choices I had while looking for a mount kit.

Great Mount. Used this to mount a 100'' Hisense U8 4k TV that weighs about 157lbs. I was a little worried about it being able to handle that heavy of a tv but it is holding no problem. Very well made. Easy to install. Directions are simple and straight forward. 10/10 would definitely recommend.The only feedback I would give is the locking tabs on the bottom should have a ramp to them. So when you hang the tv on the top bracket the bottom snaps in to the locked position. The way it works now is you have to pull down the locking string to unlock the tab then push in the bottom of the TV. Makes it a little tricky with a 150+lb TV and not a whole lot of room to grab the strings.

This 32-inch TV arm support was an excellent purchase. It feels resistant and well built, holds the TV without problem and allows you to move it in different directions with ease: turn it, tilt it or extend it. The installation was simple, with clear instructions and all accessories included. Ideal to save space and adjust the viewing angle according to the place. Very happy with the result, totally recommended!

Simple, practical, low-profile, easy to mount. I installed with a Hisense 50” that only had 4 mounting holes so the unit is not adjustable horizontally. Great value for the money if you don’t need an adjustable mount.

This product came with everything I needed including hardware, a template, and a level (though I would recommend using a larger level). The only remaining items you'll need are a stud finder, a pilot-hole drill bit, and a drill/driver. It's rather straightforward to install on the wall and attach the TV. A no-frills, quality, budget friendly alternative to everything else out there.

Very easy to install; very sturdy; size is perfect to hid behind tv; holds my 100 inch tv effortlessly.

Has great range! I love that I can tilt my tv and rotate it easily to be wherever I need it. It’s sturdy and easy to use.

After my kid smacked and broke my 8 year old 80-inch TV that I knew I should have mounted in the first place with his VR controller, I upgraded to a 100-inch TV and needed a mount big enough to take on the size and weight. I have never understood why there is such a high markup on TV mounts at the big box stores so I immediately came looking for a more affordable solution.The USX STAR wall mount came with all the bolts, spacers, and lag bolts needed and I especially liked the template that made it super easy to mark the holes on the 3 different studs I drilled into. The mounting bars easily fit the 600 x 400 VESA mount on the TV.My biggest concern was was not being able to reach the straps that need to be pulled to unmount the screen in the future due to the size of the TV, but this was easily remedied by adding a few wire ties to extend the straps.I also recommend that you plug in your TV into your outlet if it sits behind the TV along with any other connections before you actually mount it as it will be very flush with the wall as described.