VViViD XPO Black Carbon Fiber 5ft x 1ft 8yr Car Wrap Vinyl Roll with Air Release

I wanted to add to the "black and red" theme on my motorcycle, and a very annoying chrome center console on the tank reflected the sun right off in to my face while riding in the high sun times in the afternoon. So I thought I'd wrap it. This carbon fiber pattern stuff worked pretty well. It's a matte type finish, so it's not reflecting light like a gloss type finish. When I started to put it on the first piece, I had to learn as I went. I had never used this type of material before. It is quite resilient, especially when a heat gun is taken to it. Since these pieces are pretty small that I wrapped, I didn't use a lot of material. But it takes some getting used to to get wrapped around all the corners and get all the wrinkles out of it. That's where the heat gun comes in handy. I'm sure a hair dryer would work too, but I had one from gluing hockey stick blades to the shafts. Worked just fine, but don't get it too close and hold it on too long in one spot. It was just a learning curve on getting the pieces wrapped, and then cutting the extra, and using the heat gun to help stretch it around the curves and stretch out the wrinkles so it was smooth on the contoured surfaces. It's a good 20 footer. From 20 feet away you can't tell anything that I messed anything up! But the quality of the product is good so far. It's been in the sun and rain only for a short time by now. But everything is sticking as it should and not peeling off. While heating, reheating, stretching and moving the material on the piece multiple times it had good stickiness. Sticks to itself really good, and anything else you get it near also so if you are working on a small piece to wrap you will just want to be watching all the corners and extra material. In addition, the air box on the side of the motorcycle is exposed to more than just the heat that it gets sitting in the elements from the motor. And still everything is good on it, holding in place with no issues and looking pretty good. I have provided some before and after pics of what the pieces looked like. There are a few more pieces I was considering also doing. The pieces that I wrapped are of a chrome plated plastic.

The VViViD XPO Black Carbon Fiber Car Wrap Vinyl Roll is an impressive product that delivers both style and functionality. The carbon fiber finish looks sleek and adds a high-end touch to any car surface. What I appreciate most is the Air Release Technology, which made the application process smooth and bubble-free. Even as a first-time user, I found it easy to work with, and the results were professional-looking. The vinyl adheres well and is durable enough to withstand daily wear and tear. The 1.5ft x 5ft size is perfect for smaller projects or accents on a vehicle. Overall, this wrap offers great quality and a striking appearance at a reasonable price. Five stars!

The VViViD XPO Black Carbon Fiber Vinyl Wrap, known for its outstanding application technology, is not limited to just cars. In this case, it was used to give a laptop a fresh and stylish look. Here's why this product deserves a solid rating for its versatility and quality: Sleek Carbon Fiber Appearance: The black carbon fiber finish of this vinyl wrap adds a touch of sophistication and modernity to your laptop. It transforms the device's appearance, making it stand out with a sporty and high-tech aesthetic. Air Release Technology: The standout feature of this vinyl wrap is its Air Release Technology, which simplifies the application process. This technology enables bubble-free installation, reducing the chances of imperfections and ensuring a smooth and clean look. High-Quality Material: The vinyl roll is made from high-quality materials designed to be durable and long-lasting. It resists fading, cracking, and peeling, ensuring that your laptop maintains its stylish appearance for an extended period. Ease of Application: The Air Release Technology simplifies the installation process, making it accessible for DIY enthusiasts. The vinyl conforms to the laptop's curves and edges for a seamless finish. Versatile Usage: While designed for automotive applications, this vinyl wrap is versatile and can be applied to various surfaces. Its use on a laptop showcases its adaptability and the ability to transform the look of different objects. However, the reason for a four-star rating instead of five is that the application of vinyl wraps, including cutting and trimming to fit the laptop's dimensions, can be challenging for beginners. Precision is essential to achieve a professional look. In conclusion, the VViViD XPO Black Carbon Fiber Vinyl Wrap is a versatile product that can elevate the aesthetics of various surfaces, including laptops. Its sleek carbon fiber appearance, ease of application, and bubble-free finish make it an excellent choice for those looking to customize and rejuvenate their devices. However, it's important to note that applying vinyl wraps requires careful planning and precision to achieve a flawless result, which may be challenging for individuals new to the process.

these are great!! they’re super bright, and have had them about 6 months now and no issues with them. nice amber color. i did put a little caulk around the edges to waterproof them and highly recommend you do as well.

We LOVE carbon fiber in this house, it's so modern and high-tech looking on anything it's applied to! I was so happy when I found this, it's so cheap, and so easy to apply, I hate looking for phone cases and not finding any carbon fiber options, and I hate buying something that's internally great, but with a ugly exterior, this wrap has fixed that! It's such a nice shiny color, and it's so easy to apply, wrinkles are easy to fix and its sooo easy to stretch over something like an earbud case. Thankfully it doesn't take too much heat to get it ready or to set it because I even wrapped my bare phone with it (probably wasn't a good idea but I was exited) and it was fine! didn't even trip the heat warning! It's so easy to keep clean too, it's smooth and the texture is nice and sleek. And so much bang for your buck, with just 20$ I have enough wrap to wrap basically anything I want for a longgg time. I so 100% recommend!!!

Sticks and goes on well just came with wrinkles and a few areas were damaged before I even used it and took it out the package takes a while to put on if your learning corners feel impossible even with a heater to make it stretch it just doesn’t turn out that good it’s a good woven texture and looks good from afar and close it’s not too thick but any curves ur gona need to heat it up

I purchased the VVIVID XPO Vinyl to wrap the trunk of my 2015 WRX. Overall I was very pleased with the item. I am inclined to think most of my problems came from user error other then product failure. That being said, Below is my breakdown based on what I was looking for in the product; Packaging/Shipping: The vinyl came within two days in a full roll. I know there were some concerns for the sheet coming folded. This was not the case and the roll was crease-less. Open the box for the first time outdoors however. The bottled up vinyl smell is a bit strong when the product is first opened up. Product Quality: My first thought was "Wow this is more stiff then I expected". Most of this stiffness is due to the backing paper. The carbon fiber is more of a raw texture giving it a matte finish. It still has a great look, just not as glossy as real carbon fiber parts. This is all a look preference though. I think it looks better with less gloss. Ease of Use/Installation: This is a mixed bag for me. If one has a smooth, semi flat to flat surface, then installation is a breeze. I started on the top of my trunk and that was a quick as anything to install. The vinyl is super forgiving and very easy to push bubbles through. My trouble come with the turn down to the back side of the trunk. The vinyl is nice in that it is heat activated. This allows one to pull up and re-position many times with no issues. I had to pull up and place the back a few times and one of them used too much force. This resulted in a tear in the vinyl. At this point I had to scrap the back of the trunk and just do the top. Like I said, this tear was most likely my own error. Overall, I thought it was very easy to use if one is patient with it. Durability: The installation was about 4 weeks ago and the product is holding up just like the day I installed it. Some bubbles will appear days after the install as it is baking in the sun. All one needs to do is rub them and the air release tech will do the rest. Overall: Really great product. I actually plan on purchasing more to wrap my roof and hood. Looks great from any angle. I have had a few people ask about it already because it looks so good. Five stars based on the fact that I was a complete beginner and was still able to do a professional looking job. Great for first time users of vinyl wrap!

Not having any experience with “wraps”, I didn’t know what to expect. I knew I C wanted a different look for my armada radio trim. So my husband and I set out on a journey to YouTube followed by quick stops at trial and error. The result is awesome! If I’m able I will post pictures after I go out and take them. My husband not I have ever worked with the materials, so everything was new for us. And wrapping a curved portion of a dash board with openings that are circular, rectangular and cut outs was daunting to say the least. The product was easy to use. The thickness allowed the product to be worked and stretched without deforming the patterns. Hearing the material was slightly scary at first but we learned quickly and the end results are AWESOME!!! No complaints what so ever!! I ended up buying another roll to do some accent trim and body pieces. The contrast in colors and textures combined with my interior colors and textures looks as if the factory designed it way. Super pleased. Super impressed!