🔧 Elevate Your Robotics Game with Precision Engineering!
The Mini Capsule Electrical Slip Ring by GeeBat is a compact and efficient solution for transferring power and signals in robotic applications. With a diameter of just 12.5mm, it features 12 circuits capable of handling 2A at voltages up to 250VDC/VAC, all while maintaining a maximum speed of 250RPM. Its lightweight design and robust construction make it an ideal choice for modern engineering needs.
| Manufacturer | GeeBat |
| Part Number | GB20-028 |
| Item Weight | 0.81 ounces |
| Package Dimensions | 3.2 x 3.2 x 1.3 inches |
| Item model number | GB20-028 |
| Is Discontinued By Manufacturer | No |
| Material | Metal and plastic |
| Pattern | 12 Wires w/ Flange |
| Batteries Included? | No |
| Batteries Required? | No |
D**1
M012A flange model: Working well and seems to be of high quality :)
It's been working well so far and seems to be of high quality! I've had 12v @ 1.1 amps running through it non-stop without any issues yet.I did find a spec sheet for a similarly-named model (from the same company) which I've uploaded here in case it's useful to anyone. To find spec sheets for these other listed models, just check their site (Senring's site). They have data sheets for all model types. This one I have would be a Type A. The dimensions on the data sheet are pretty dead on so that sheet aided a lot in the design of the part I'm building.Also note that it's only the tiny nub sticking out of the top that rotates (I wasn't positive when I placed the order).Hope someone out there finds this info useful!
P**.
I built a maritime crane and this slip ring was perfect for my application and a great set of wires
It was built very well and worked great for my application. The sets of wires and the lengths were more than enough. I highly recommend it
A**R
Good product
very good product. The wires are a very small gauge, if that was mentioned in the description it would be helpful. It made my project easier
A**.
Useful little slip ring
I am using this to send I2C information between an Arduino and Rotating LIDAR module. So far it is working great. The wire gauge is very small.
P**R
Smooth, low drag, nice stiff tinned wires
The rotating nub on top is just the size to accept a gently force fitted 3/16" dia brass tube on to it with the wires inside the tube. Cut a window in the side of the tube for the wires to exit and the free end of the tube becomes a torque tube to slide over a length of 3/16 allthread rod with a but of butyl rubber on it for a friction fit.I used it in a wind vane to decouple rotation from an lm303 i2c magnetometer mounted on the bottom of the wind vane main shaft.I've tried reed switches and linear Hall effect sensors but this is by far the most accurate/least troublesome version. Made possible by this slip ring.Very satisfied.
L**E
Works well
Works well.
S**.
very good product. The wires are a very small gauge
very good product. The wires are a very small gauge, if that was mentioned in the description it would be helpful.
E**A
works as expected
Have not used it yet, but looks like it is perfect for my project
Trustpilot
2 months ago
3 weeks ago
