TCMT Quarter Fairing & Smoke Windshield Fits For Harley XL 883 1200 1988-Up Dyna 1995-2005

This is a great product for the price! Blows harley out of the water with the price and looks awesome! Harley wanted over $400 +\- for essentially the same product.However, if you plan on buying this make sure to buy bungking mounts and Memphis Shade fairing Mounts (you need 4 of them and they are only sold in pairs so you need x2 of them and they cost $50 each thats an extra $100). Make sure you get the right size for your forks. Doing so will allow this to mount much better/flush-er. Also, if you buy this it’s a good idea to go to the hardware store and buy better hardware as the included hardware doesn’t feel sufficient enough. If you put it together you’ll know what I mean.Blocks the wind a bit like its supposed to, you’ll notice. Oh and if you buy the smoked version make sure to get a better headlight, if you don’t you have to run the high beam 24/7 to see anything.Last thing, be aware of the throttle cables, if the fairing pushes against them you can get a sticky throttle. I get it sometimes if i let off throttle but rarely. Just requires some adjusting. Just something to be aware of.Last picture for before and after

Super clean looking. A little dark so you have to get really bright headlights. Seems very sturdy as well

Upon getting the quarter fairing the windshield was wrapped in a celifane plastic. I took that off to find there were two small cracks in the windshield. After that I decided to still use it anyways and ignore the cracks because it was tinted and you could barely see them......But after literally three or four rides now 3 of the 6 mounting screws have broken out of the plastic thread housing. Cheaply made and not worth the money at all. I have barely put any miles on this fairing and now it has to come off. It only fit correctly after purchasing the bracket kit from another company and clamps from a third company to make it fit right. Very let down by this and can absolutely NOT recommend anyone buy this.

Be prepared to modify the brackets for 39mm forks. You can also buy the 39mm adapter plates made by Bung King. Buying the plates and this fairing still comes out much cheaper than the Harley version. The seller does not understand that 49 and 39 mm have different brackets not just different diameter clamps. I know this because we had a conversation. I have had multiple fairings like this over the years on 39 and 49 forks and the brackets are most definitely not universal to both. Just be prepared with your grinder or the Bung King plates if you buy it for 39mm. Still a nice fairing at a great price and would be 5 stars for me if they fit my 39mm out of the box

They say it doesn’t work on a Wide Glide front end, wrong! However, when it was sent to me they had attached the brackets already UPSIDE DOWN!I had thought that was how they were supposed to go on so it took forever to figure out why it wouldn’t because I seen it on a Dyna Wide Glide already. Once I figured out that it was upside down it only took about 45 minutes to install it. You MUST buy the TCMT quick brackets to install it though, as this will make it so much easier.Don’t overtighten the windshield and headlight screws, just snug! Also with the smoked windshield you’ll want to buy a better LED HEADLIGHT, I bought one from Amazon for $35 that I think will work well. Good luck!

Had to fab my own top mounts to make it fit my forks but great nonetheless. 2008 sportster nightstand 1200xl

Installed on my 96 fxds. Used factory HD windshield mounts after some adjustments and they worked just fine. Very rugged piece for the price. My only complaint would be to not wrap the windshield and headlight lens in plastic then install them to the fairing. Not really a big deal but makes it a pain to get the plastic off. Also from other reviews ive seen about tightening the screws til the windshield breaks....well they have rubber washers on them all you need to do when retightening them is get them tight enough to squish the rubber slightly and youll be all set. I checked the tightness after a few rides and nothing came loose. Definitely worth buying if you dont want to buy the HD fairing and want the exact same look.

It is exactly as described and fit on my 2007 Street Bob with zero issues. I used Harley quick connects that I previously had. The issues came when I had to take the clear plastic shields off to get all the plastic they were wrapped in off. When I went to reattach the shield both top and bottom, the top one completely cracked the fairing on both sides where the screws went through. So do not whatever you do tighten the screws very much as it will crack the plastic on the fairing. I didn't realize it was cracked until I when to ride and the windscreen almost came off. Next when I attacked the bottom plastic over the headlight and went to tighten the screws, the one in the top left hand corner cracked the plastic and broke off the corner. I did not crank any of these screws down, I was just holding the little nut in the back with my fingers and using a screw driver. Just tightening like this cracked these. To fix I took pieces of aluminum strips and reinforced behind the screw holes on the fairing. I epoxied the aluminum strips to the back and painted them black to match. I am going to have to order replacement clear plastic wind screens as there is no repairing the headlight cover. All in all, the fit was great but the quality of the plastic is pretty horrible. I would have expected it to be much stronger considering the vibration and wind resistance this will have to endure. Pretty disappointed with the quality.