Noctua NF-F12 PWM chromax.Black.swap, Premium Quiet Fan, 4-Pin (120mm, Black)

These fans are amazing and worth every penny! Not only are they super quiet even at high speeds, they are also great at pushing air keeping a nice steady flow of air. The only downside to these fans is unfortunately they do not come with RGB lighting, but honestly I'd much rather have cooler temps while still having minimal noise occur from the fans spinning. I have ordered 3 of these fans and they all work flawlessly. Again the cooling capability of these fans are good. Look wise the fans are black with the options to put on colored anti vibration pads on the corners of the fans. Will be ordering 2 more in the near future.

I bought a Thermaltake AIO triple radiator and after about a year I started hearing some noises from the fans. I knew Noctua fans are supposed to be excellent fans but I can't deal with the brown. I was pleased to find these black ones. I noticed the RPM was listed at 1500 and my Thermaltake fans were 2000 I think. These fans are definitely quieter most likely due to the lower RPM. I tried a test and cranked my CPU fans to 80% and I could barely hear them. I turned them up to 100% and they were more noticeably louder but still quieter than the Thermaltakes at 50%. They did get up to 1500 RPM at 100% so that rating is accurate. I ended up setting them at a minimum of 50% and maxing out at 100% with high temps but it never gets that hot. I didn't really notice any difference with CPU temps while playing a game for a few minutes. There is not much airflow coming out of these fans when you place your hand in front of them. I was worried they might not move enough air but everything I have read says they are a better design at moving air at a lower RPM. Who knows? It is irritating they only give you 4 of each color for the anti vibration pads. I put the black ones on top and red ones on bottom. I don't see that the top ones serve any purpose because the top of the fans are not touching anything being mounted on top of my radiator in a pull configuration. I can't think of too many setups where your fan would be contacting another surface on both sides so maybe that's why they only give you 4? They seem to be high quality and the packaging was nice. I was not happy about the placement of the 4 pin connector coming out of the fan to plug the extension cable into. It is very short and I wanted to pass it through the opening around my radiator. I ended up having to leave the connector above the opening. Not a big deal but some people might find it less than ideal for their setup. The extension cables were long enough with length to spare and I am in a full size case.

I purchased this Chromax Black fan to replace the fan that came with my Cooler Master Hyper 212 Evo. I am incredibly impressed with this fan. It is not even Noctua's quietest 120mm fan, I believe that goes to the NF-A12x25 ULN, but this thing is incredibly quiet. Even at full tilt, this fan is pretty quiet, and the noise it makes is not annoying. This fan also looks great. I'll admit, I've got a soft spot for RGB components, but this fan on my CPU cooler honestly looks better than an RGB fan would to me. It oozes a sense of authority. I have a Ryzen 5 3600, stock clocks, and this fan easily keeps it under control. I have stress tested my CPU with Prime95 and this fan and cooler combination, along with Arctic Silver MX-4 keeps it at 56 C the whole time. My custom fan curve has it set to run at 75% at 60 C, so this fan is easily enough to keep my 3600 in check. I installed the vibration dampening pads on the outside of the fan because I have some hidden on the cooler side of the fan already, and they just look too good to put on the less visible side of the fan. The cable coming off the fan is extremely short, so chances are you will have to use the included extension, which is sleeved and also looks good. The extension is very long, I don't see anyone not being able to reach their fan headers unless they're using this for a top mounted radiator in a mid tower and their CPU fan headers are on the bottom of their motherboard for whatever reason. I didn't really pay attention to my temperatures with the stock fan that came with my cooler, but I imagine this is better, there are tests that show the Noctua was a degree or two cooler than the stock 212 Evo fan, and the Noctua is far quieter. Pros: -Absurdly quiet, my Corsair SP120 case fans drown it out -Looks good, especially with the black pads -Vibration dampening pads are very soft and the colors are nice, they also look killer -Comes with a very long extension cable in the box Cons: -The cable coming off the fan was an inch too short to reach my CPU fan header on my ASUS TUF X570-Plus, so I had to fold and zip tie the extension to the side of the fan to reach the header without looking ugly -I wish it came with double the anti-vibration pads so there were 8 of each color, but it's okay

I installed this on my cpu heat sink and it keeps the temperature at around 30-70 degrees Celsius depending on the load. I programmed the fan to run between 50-90% speed depending on the temperature of the CPU. It’s relatively quiet if you run it at under 90% performance and the build quality is great. This one is specifically good for direct airflow through the heat sink. I highly recommend it.

It’s Noctua—what else needs to be said? Quiet, efficient, and top-tier quality as always.

Es Noctua, ya sabemos que es calidad y silencioso

The fan itself is quieter than the air colliding with my radiator

Es de Noctua y no esperas menos que la mejor calidad, rendimiento y poco ruido. Comprado para montarlo como segundo ventilador en el Noctua NH U12S chromax.Black.

I've bought alot of these over the years, noctua is the only company ive bought fans from where i had absolutely no issues with, bearings are ultra quiet and quality is as high as they get, they just wont fail me.

Oramai uso solo prodotti Noctua da molti anni e, che le ventole siano nel classico colore marrone (che a me piace), o chromax, sono sempre le migliori ventole e non hanno ma tradito le aspettative. Questa ventola, NF-F12 PWM, è adatta per dissipatori e radiatori e l'ho comprata per installarla su un Noctua NH-D15 chromax.black al posto della ventola frontale (che è da 14cm). Non potendo ancora usare il dissipatore nuovo la sto provando sul mio ecchio dissipatore Noctua e si comporta molto bene: migliori temperature del processore ed è più silenziosa della precedente ventola Noctua anche a velocità di rotazione elevate. Nella confezione sono presenti anche 24 cuscinetti antivibrazioni, 4 per 6 colori. Se consiglio di comprarla? Certo che sì, perchè ci si deve pure pensare?