REXBETI Ultimate-750 Paint Sprayer, 500 Watt High Power HVLP Home Electric Spray Gun, 3 Nozzle Sizes, Lightweight, Easy Spraying and Cleaning, Perfect for Beginner

Update 11/2019 - this sprayer was used a lot more this year than was intended. one small job turned into one very large project. while i had some issues with the instructions really there wasn't much to complain about with this. after having finished with a weeks long project i can honestly say for the money this thing is a real value. the worst limitation for me was the size of the tank. i ended up getting a second so i could have one filled and ready to swap out when the one would run dry. that alone helped speed things up the job a good bit. so after a lot of use i decided to change my rating from 4 to 5 stars even with the sad instructions. Thankfully I have not had the need for a sprayer in over twenty years until recently. That last sprayer I used was big bulky and after I was done I hated it so much I threw it away. I had hopes that after 20+ years paint sprayer in general would be better than what I’d used, and this one is. The Good – 1 – Light weight 2 – Ease of use 3 – Easy to clean 4 - Multiple tips and three spray patterns fit most every spot The Bad – 1 – The page says can be used with latex paint, the instructions do NOT 2 – The manual/instructions that come with lack important details 3 – The paint receptacle is on the small side The sprayer comes with all you need to get started other than paint, thinner, a paint strainer/filter, extension cord, and over-sized paint bucket to mix. It has three different tips that appear identical other than one having different diameters. The website says what they are for but not in the manual? I may rant on instructions and manuals but they matter a lot and not just with this product. Something so integral to a purchased item, something that cost cents to produce? But all too often neglected. I like this product but it is frustrating to once more get a manual that is so poorly written in this case it doesn’t mention details on paint? Really it is primarily a paint sprayer? Yet the manual’s focus is on other thinner materials like stains. Example on the website it says, “great for spraying latex paint,chalk type paint and milk type paint.” Well the manual list everything else not a word about dilution for latex paint any paint? It has a chart for dilution everything under the sun literally speaking but paint? It also does NOT say a word about what thinner type to use with latex paint? There are many types of paint thinners. Paint is expensive mistakes are costly, better safe than sorry. So I checked locally and found I should use a mineral oil based solvent thinner. I used 1-1.5 cups of thinner to however much paint is held by two of the reservoirs. Mixed thoroughly 4-5 minutes. As to use, it did have mostly good coverage partly due to it being so light weight. The sprayer paint receptacle unscrews easily. I found out the hard way that I had to stay at least a couple inches away from my masking line as it would spit random bits of paint from the get go over the masking line. I tried both vertical and horizontal patterns and made no difference with that issue. I ended up leaving a two inch gap around everything I’d masked and had to touch up by hand. The sprayed areas did show a very good consistent results. I am happy with the overall paint application. My impression was positively impacted by the fact that I had ordered a second kit that included a spare paint receptacle. For the money I can’t complain much though. Yes the instructions are bad, missing a lot of important information some as mentioned. But all said the sprayer works well for the most part. It isn’t perfect but it is worlds away better than what I had used previously. You can pay a lot more and get a better sprayer but in my case this unit fit my needs best and as said was affordable compared to others. I cannot say how this sprayer works with anything other than latex paint. Based on my results for most small to medium jobs I would recommend this. Jobs that are bigger mostly due to the smaller size of the paint reservoir, at a minimum you really need spare tanks to hold more paint. That is its weakest point and why maybe not the best for large jobs but to each their own.

We built a garden cottage in our back yard, and it was time to paint it. My son spent an hour-and-a-half just painting under the eaves on one side of the cottage using a paint brush. This was going to take forever! I decided to buy this spray gun, and it is seriously one of the best purchases I've ever made! What took my son an hour-and-a-half with a brush, my husband did in less than 10 minutes with this spray gun! We had never used a spray gun before, so I was worried that it wouldn't work right, or we wouldn't know what to do, or we would mess it up, or a million other things. I chose this particular gun after comparing all the reviews, and not wanting to spend a ton of money, but still having a decent gun, and having it delivered the next day for free. The instructions are a bit confusing, but I just used common sense and figured things out. A very important thing to do is to make sure that you filter your paint before pouring it into the spray container. I bought a paint filter (it's just some mesh) from the hardware store and poured the paint through it into the container. If you don't filter your paint, you will end up with a clog which will cause the gun to spit and sputter. Also, make sure that your paint is the right consistency. Our paint was Behr Paint & Primer (from Home Depot) and it was very thick. The container for the gun holds about a quart of paint. In a separate container, I poured in 1/3 cup of water, then about a quart of paint. I stirred, stirred, stirred, until it was mixed super well. Then I poured the thinned mixture through the filter into the gun container. It took a few practice strokes to get the feel of the gun as I began spraying the paint onto the cottage, and I had to figure out how fast I should move, and how close to the wall I needed to be, but after we experimented, we figured it all out and we made super fast progress. There wasn't very much over-spray, which I was happy about. We painted all the walls (about 600 sq feet of vertical walls) and under the eaves (about 75 feet) with the gun, using about 3 gallons of paint onto bare siding. The gun worked perfectly. In fact, my husband tilted the gun in all directions, even practically upside down at times while doing underneath the eaves, and I was surprised that the gun still worked! Then we built some shutters and used the gun to spray the shutters a different color than the cottage. After we were done painting each time, I took everything apart, and cleaned everything really well. The handle and the motor are one unit, which pulls off of the front part (which is the container and the nozzle). When you're ready to clean the gun, pull off the handle/motor and set that aside. It's the front part that you will be taking apart and washing. There's a little cleaning brush included to help get in the small areas. I have my own cleaning brush that I used also. I've really had a great experience using this spray gun! I wish I would have gotten it years ago! I was thinking about all the things we have painted with a brush and roller, when we could have been using this spray gun! Now we want to repaint our actual house! With this gun it will be a breeze!