Adjustable Tap Bias Binder Foot for All Low Shank Snap-On Singer, Brother, Babylock, Euro-Pro, Janome, Kenmore, White, Juki, New Home, Simplicity, Elna and More! Adjustable Range from 5mm to 20mm

I was fascinated with this foot! I had no idea it would be this easy! I highly recommend this to ones who sew.

This guy has added years to my quilting! I am developing arthritis in my hands which has been making it difficult to add binding to my quilts. I actually thought I was going to have to stop quilting, until I discovered this foot for my machine! It is easy to install and use.

Seems to work okay, just used it a little while, but okay.

This makes sewing on bias tape a DREAM. I will never go back to the old way ever again! While it was a little weird and hard to figure out at first, once you do figure it out it's like magic.

After I removed the excess plastic (see below), it worked fine. I have only used it on 1/4" double-sided binding. You must get the binding started thru the plastic feed guide with the foot off the machine. You may need a coax it out the exit with an awl or needle. Once started thru it's fine.The screw in the back sets the needle position on the binding. The thumb-screw on the side keeps the binding pushed to the left against the fabric edge. Ignore the mm markings when setting the thumb screw; just get it close and then run a sample setting the thumb screw so the fabric sits tight in the binding fold. Mine looked like it was squashing the binding just a bit when it was set up for correct feed.The fabric must be kept in the slot, all the way against the right edge, so it sits tight in the fold of the binding. The slot is thin so this foot is not suitable for binding thick material.Initial problem with my unit: The slots where the tape exits were blocked with thin plastuc so the tape could not be fed thru. This thin plastic is from the plastic molding process and is called flashing. It is supposed to be removed during manufacturing, but in this case it wasn't. A few minutes with magniying glass and a sharp blade and I had it cleared.

Haven't used it yet but looks sturdy and should hold up well and do what it's designed to do.

Adjustable Tap was not in the box --Sorry, I found the foot in the bag - it's so small and inconspicuous.

Didn’t work

Mon épouse couturière chevronnée est heureuse de cet achat. Et beaucoup moins dispendieux que le modèle du catalogue de Husqvarna.

va muy bien si es bies formado de este que se compra en mercería que viene planchado. Si es una tira de bies no va.

C'est un bon produit, qui s'adapte sur les nouvelles machines. En ce qui concerne la mienne une starlette singer ce n'est pas le cas singer à changer la largeur du pied presseur. J'ai eu un très bon contact avec le vendeur qui à accepté le remboursement après avoir vu les photos et vidéo. Ce qui n'empêche pas le produit d'être fonctionnel sur une machine plus moderne que la mienne et de bonne qualité.

Très sastisfait

Aún no lo he podibo probar, pero es lo que esperaba