GETINLIGHT40-inch Swivel LED Under Cabinet Lights, Glass Lens, Selectable White 2700K/4000K/5000K, Dimmable with Wall Dimmers, Bronze Finish, IN-0202-5-BZ

I had purchase the older model of these under cabinet lights for my studio and they were fantastic. So when we decided to replace our existing halogen under cabinet lights with the newer swivel version of these LED lights it seemed like a no brainer.I bought 2x of the 32” length, 2x of the 40” length and 1x of the 12” length to cover the entire length of our cabinets, assuming that when we set the color temperature switch on each individual fixture they would match.They didn’t.Each length of fixture has a different color temperature for each of the three settings. You would assume (as did I) that when you select 3200 degrees on all of the fixtures the color would be the same. Or if you select 5600 degrees on all of the fixtures it would be the same.It is not.So now, after spending 4 hours removing our old fixtures and installing these, we have a whole color wheel of light temperatures under our cabinets.Very disappointing.The only solution I can think of is to return the 40” lengths and get two 32” lengths and another set of 12” lengths to make up the missing length. But there’s even a color difference between the 12” and 32” versions.Total bummer.So the takeaway is, if you are buying these and want consistency between multiple fixtures, make sure you only use the same length of fixtures.

Purchased to replace a hard wired fluorescent light, with bad ballast. May as well go LED, although no reviews were available at the time. Other LED's were eliminated due to bad reviews or poor design(by looks or reviews). Again, love design, swivel, glass diffuser, ability to use a dimmer. But...it came with no wiring instructions!!! Really!! So found a black wire and a white wire, pulled them out and tested them on temporary circuit, it worked. Although is has a knockout every 4 inches, only one knockout, in the middle back of the light, on a removable plate, allows you to screw the electrical connections so they will be inside. Also, there is nowhere to attach a ground wire. I basically pulled the ground wire back out through another knockout, and then drilled a hold to attach the ground wire to an external screw to the body on the back of the device. Multiple devices can be wired together via a side plate(although, again, specific instructions of this would really, really be nice)

Exceptionally well made. After installing 7 (mixing 3 lengths) to replace all fluorescent under-counter fixtures in my kitchen, it was very helpful to have a choice of color temperatures and high-low brightness to get the right look in the room. Finally, I used the seller's recommended list to find a compatible dimmer - another LED advantage. Low power consumption, no bulbs to replace, no more cold fluorescent flicker, no more ballast/transformer hum and fire danger. Comes with the option of hard-wired or plug-in. Easy to chain multiple fixtures with the provided cords. The lens swivel allows fine tuning of the light splash effect. Note: The compact design includes a very narrow channel for hard wiring. Much less room for connections than in traditional fixtures. Tight wiring adds some difficulty to the already awkward positions required when working with under-cabinet fixtures.

I ordered 2 * 18" and one * 12" lights to replace existing CFL light installation when the house was built. The units themselves are very well made IMO. I like the idea of 3 different color temperatures. My wife likes the 2700K "color" although I prefer the 4000K "color".Pretty easy to install in my case as the existing hard wiring was already in the house. The power connectors are housed in the light unit itself, the connectors are just a push-in fitting. Awkward location under kitchen cabinets (for me in my old age) but not the fault of the lights <g>. The units come with 110V power cord and a short (around 5" or so) light to light connection cable for some installations (neither of which I needed).I had a few suggestions for the company (some shorter mounting screws for some cabinets with a shallower base and maybe a template for the holes in the bottom of the cabinets). The company selling the lights is in MO but lights are from China. I wrote to the company with those suggestions. I had a very fast response twice from Chris in MO. Seems like an excellent company to me. Highly recommended. Excellent company!

Awesome light for built-in desk! Mounted below a build-in book case with back of light towards front of bookcase - this enables having the light point straight down for direct lighting, or tilt towards the back wall for more indirect lighting. Quality of fixture is good and mounting was easy. Our purchase was of a 32" 2700k warm-white fixture, which is used over a 60" wide desk top. The fixture has a "High-Off-Low" switch. We have it plugged into a switchable outlet, which also works fine for turning it on and off. The low setting is about 60% of the bright setting - this is noteworthy as the overall light output on high is relatively bright. If I used this under a cabinet, I would find the low setting about as bright as I would want it, except I could see using the bright setting if preparing a large meal (dinner party, Thanksgiving, etc.) The 2700k is also about as "white" a light as I would want in a kitchen or over a desk. In either 2700k or 3000k this would be an excellent task light! Would definitely purchase again!!

A very nice, well made, and reasonably priced lighting unit. Well packaged with all the extra goodies you need to do either hard or plug-in wiring. The only reason this does not earn five stars (and the reason I returned it) is that it is NOT a 2700K light. I'm trying to match the color if incandescent lighting and this does not do that. I'd say the color is closer to 3000K. If you're looking for a great workspace light, this may work for you, but if you're looking for something that will precisely match incandescent/halogen lighting, it's not quite there.

Purchased four(4) 24 inch and one (1) 9 inch light for a L-shaped under cabinet lighting application in the kitchen. Received the fixtures within 2 days of placing order - excellent service. Except for the 90 degree corner, where I used the supplied 6 inch linking cord, I used the supplied End-to-End connectors, which worked fine. To hardwire the 24" fixture via the housing knockout was easy enough, as there is sufficient space inside the fixture. The same can not be said for the 9" fixture, where the connection had to be made outside the fixture, as there just is not enough space to tuck away the electrical wires and the Push-in-Connectors. The same applies to the 12" fixture which I ordered to replace the 9" light. The light output (lumens) of the 9" light was insufficient and just not bright enough. The quality of the fixtures is very good. One minor irritant is the poor quality of the tiny screws, which hold in place the wire compartment cover and the plastic cap at the end of the fixture.I also installed a Lutron dimmer - model DVCL-153P - which works fine with the LED lights.I certainly would recommend the GetInLight swivel under cabinet fixtures.

I choose these swivel lights with dim features in my kitchen for under the cabinets light. Brightness is excellent, I love that I can swivel the angles to how I need it, having colour tone from warm to cool also a great feature. Also, dim feature gives such a great ambience. Will buy again when moving to the next house.

The only problem I had was the supplied mounting screws were too long and had to be replaced. My cabinets are 1/2" minimum plywood. The light fixtures are excellent quality and function exactly as advertised.

Excellent light, easy to install. Multiple options dimmable, wiring flexible, different lighting capability soft or bright. The swivel light directions for optimal lighting direction. I would purchase this again

pour la cuisine