Brock Replacement Headlights Driver and Passenger Compatible with 2003-2007 Accord 33151-SDA-A01 33101-SDA-A01

These headlight assemblies are a fantastic value. The price was so inexpensive in comparison to the OEM version I was worried the quality would be shoddy; but these turned out to be great. The fit and finish are really good. The price for a "pair," with the high and low beam bulbs included, are about 1/3 the price of "one" OEM unit without any bulbs included. I followed the YouTube video on how to do the replacement and the entire process took about 1.5 hours. I would suggest also getting a new pack of 10 mm Push Type Nylon Bumper Fender Flare Fastener Rivet Clips (915-3-SZ3-003) so when you reinstall the bumper you don't need to reuse the old fasteners. After some years the original fasteners get pretty beat up (especially the ones on the bottom of the bumper) and it is much easier when you reinstall with brand new fasteners. While I was removing the black plastic guard over the radiator, one of the plastic Phillips type retainer striped and would not come off, so I had to drill out the screw. I used a small drill bit so I only drilled out the center of the plastic screw and I was able to reuse the plastic retainer. I just used a similar sized metal screw to fasten it back to the plastic retainer. I also took the suggestion of other reviewers and re-used the original blinker unit in the new assembly and all the lights now work like original equipment. Finally, I ran a leak test by spraying water over the headlight assemblies from all directions for over a minute and I did not detect any moisture seeping into the housing. I am glad I bought these versus the OEM; saved over $400.March 23, 2017 update (18 months later): The headlight's clear plastic housing are holding up well. A little patch of fogging is starting to develop on the top side of left headlight housing, but it's minor (see last picture). Feels like it will be several more years of sunlight exposure before the housing assembly will completely fog over again like the original headlights. Overall this still a really good value.

Purchased these for my wifes 2006 accord. We purchased the car new and over the years we have tried to wax them sand them clean them etc.. to no avail. I found these for a fraction of the cost of factory replacements and the fit finish were on par with OE. The car looks new and the installation although a little labor intensive was easy.You will need to remove the lower cover under the bumper, remove the bumper, remove the headlights and re attach the metal bracket from the Original headlights to the these. I would also take the Original turn signal port from the Original headlight and transfer to this one as I read this to be an issue and you do not want to take the headlights out again to do this. Worked awesome and now visibility is 10 times better, literally. When I first put them on I thought I had the highbeams on, I guess my old ones were really dull.Very happy.

READ THIS BEFORE PURCHASE. After considering about three different sets of these assembly's I decided on this pair and hoped that I did not have the same wiring problem as other reviewers. I paid a local mechanic to do the install as I didn't want to do all this by myself in my garage with only jack stands. Cost a little but I figured if anything got broken or messed up I could make them fix it. REMOVE THE ORIGINAL TURN/PARKING LIGHT SOCKET AND SWAP TO THE NEW ASSEMBLY. My driver side worked perfectly but the passenger side did the lower intensity/rapid flashing as highlighted in other reviews. I simply put the original socket into the new assembly and problem solved. BE SURE TO TEST BEFORE INSTALLING ASSEMBLY. Reaching in the passenger side was hard enough and I wove a tapestry of swear words skinning my knuckles and burning myself on engine components. With all this the lights look really good. fit appears to be identical to factory and are crystal clear. Take your time and test everything and you will enjoy the new look. P.S. I have a 2004 Accord EX-L and replaced original oxidized assembly's.