Anzo USA 111247 Clear Headlight for Ford F-150/Bronco

So in shopping for a new set of headlight housings to replace the stockers on my 96 Bronco I was worried that a lot of these clear "euro" light were just Chinese junk that would leak or bling other drivers. I couldn't find reviews on these Anzo lights but I read some of the reviews on other Anzo products and the were pretty positive.These lights were made in Taiwan. The construction seams tight and they are a quality product. The install went pretty easily but I had some issues with the 17 year old headlight surrounds but that was not fault of the lights. If you plan on using your stock surrounds theres a good chance that you will strip out the threaded stud closest to the radiator. I ended up stripping both of mine. The studs rust and the plastic that holds the nut is brittle. I don't think there is anyway to prevent this as you cant really access the stud to spray it. The outboard bolts came off like they were brand new. FYI the nuts are 11mm which I thought was a little odd. I'm used to most nuts and bolts being 10 or 12mm. Im going to order new surrounds but I put them back together and they are pretty tight even with the one stud missing.Going back together was pretty straight forward. Try to match up the adjuster positions from your old lights before you put them in so you have much adjustment when you're finished. They are a good tight fit. I had to push gently on the light to push the clips back down but I would rather have it nice and tight so they don't vibrate or shake while driving.I wasn't looking to go with a HID conversion because I didn't want to blind oncoming drivers but these housings cast a very good pattern. There is a distinct cutoff at the top of the pattern and if adjusted properly I think HID's would work well with them. I'm gonna stick with Phillips bulbs for now. They did come with bulbs but they are standard run of the mill bulbs.I'll update once I have some time and miles on them but for now I give them 4 stars. I would have given 5 stars if the Anzo USA product was actually made in the USA.I used this video to familiarize myself with the install and it is pretty good. http://youtu.be/9k6iExEJb9II didn't end up removing the washer fluid tank or battery but its pretty tight.

Looking to replace yellowing and clouded original headlight housings on my 2000 Fleetwood Bounder, I did some research and found evidence that the early 90's Ford Bronco shares the same headlight parts. Took a small leap of faith to order these, but it paid off, as they were an exact replacement for the old ones, adjusters and all, and look so much better! Worst part was accessing the backs of the adjuster fastener/clips in the under-hood area of the RV, but the second one went much easier after figuring out the first.

I put these in my 1995 ford f 350. I tried cleaning my old and yellowed lenses, but to no avail. These went in easily and are soooo much brighter. Buy a set of clips when you order the lights, it’s easy to break the old ones during removal.

These headlights look great and I like the light pattern. I am only an occasional mechanic, so it took me 3 hours of steady work to complete this job plus another half hour watching how-to videos. My advice:1.) Watch the online videos. They are very helpful.2.) Buy replacement "Headlight Housing Retainer Clips." The old ones will be rusty and brittle. There are 6 total, 3 on each side.3.) Requires an 11mm deep socket - not all deep socket sets include an 11mm socket.4.) Remove the entire grill assembly - this also allows you to clean the radiator fins while you are in there.5.) Replace the marker and turn signal lamps as part of the job.6.) I replaced the provided bulbs with Philips +30%, then notice they could be stepped up to +60% without law enforcement issues. So I made the swap.7.) Soak the nuts in Liquid Wrench and cross your finger - studs are easy to strip.

Bought these for my 1997 F-250 Heavy Duty, they will fit any Ford truck 92-96 and 97 F250 Heavy duty and up.Fitment is perfect, the bulbs are bright, and the pattern is wide and looks very good at night.Installation is of medium difficulty, expect an hour or 2 to install, there are 3 clips that you have to somehow pop off that are in tight spaces, have different styles of pliers and things to pry with on hand.I've had these for quite a while now and there Is no fogging, water problems, or any issues with them at all.Highly recommend these for a great looking upgrade. Would recommend to get new clips so the light stays in tighter, but unneeded.

These worked well on my 1995 f150. The before & after pics aren't great, but it's what I've got.. Install was simple as it could be. The beam pattern is a bit choppy but after I switched over to LED bulbs they are great. Way more visibility then the stock lights! Less glare then stock and they make the truck look way more modern! I would buy again. Keep in mind changing out headlight assembly's on these trucks is an involved project!

Good quality headlights. They come with the bulbs installed and fit perfectly in my 1996 Ford F250. They made a huge difference in night driving over the old, foggy headlamps I took out.I suggest that you go on line and learn about how to replace these headlights before you start this project. The whole front grill and the mounting assembly behind the front grill need to be removed. There are several blind nuts that have very limited access and are metric. The job took me about 4 hours. Be sure to purchase the retaining clips that hold the mounting screws. They are difficult to remove without damaging.It doesn't matter who's headlights you order, this is a challenging job. I think any shade tree mechanic can do it but you need to go on-line and pay attention to where the hidden nuts are, also give yourself some time.

A ton brighter than my original lenses, even do a better job at broadcasting the light toward the sides as well. Only issue was not that big of a deal but they had to be persuaded to fit the factory header panel but that's to be expected with most aftermarket parts these days, regardless of supplier. Make the front of the truck look more modern too. Included is a before, after, and side by side picture.

Awesome look!