Pond Armor SKU-TAN-QT-R Non-Toxic Pond Shield Epoxy Paint, 1.5-Quart, Tan, 48 Fl Oz (Pack of 1)

Used for fountain where very expensive paint would chip and peel. So far has worked well and is fairly easy to use. You have to work fairly quickly but there is ample time and the results are beautiful.

I used this for sealing a leaking fountain. I followed the directions precisely and the results were excellent. No more leaks! Having colors (including clear) other than black or white is a big plus, I chose tan. For those that have remarked about the coverage not being 60 square feet for the 1.5 quart kit, I would agree. But remember, the 60 square feet was simply based on the thickness of the coat. If the coat thickness is .02 inches instead of .01 inches (10 mil), the coverage drops to 30 square feet. I had a fairly small project so coverage was not an issue. The thickness on the bottom of the fountain had to be at least .125 inches. Still, I think the manufacturer should make the coverage value 30-60 square feet. One final note. Work fast with this stuff because when it starts to set, the painting is over.

Sets much quicker than directions say. We mixed our first batch and it set within 15 minutes, we ended up throwing away at least half of the batch away. The next time we only mixed half and was able to get it all on before it set. We ordered 2 packages since we didn't know the true size of the area we were painting. Ended up having to open a second package for just a small amount to mix, which was disappointing because we wouldn't have needed to open the second one if the directions would have been more accurate. Looks great on our koi pond. Seems to stick well to the fiberglass surface.

Very nice product. Easy to work with simple instructions. Looks very professional when finished.

The media could not be loaded. I purchased the tan color in 2021 and applied it to my water wall basin. After 3 years of summers and winters, the product is still holding up well. As long as you follow the preparation directions, you will have success. Very easy to apply. I used a paint brush to cut in, then a small roller and tray to cover the middle. Just like painting a wall. Before filling each spring, I lightly clean the winter dust off the surface and refill. No visible cracks in the surface. Color is a bit faded after 3 years, but that is expected. I am definitely purchasing this again for my newest project.

It works great just don't mix too much. It dries really quick. It creates heat when mixed so don't mix it all at once unless your going to pour it out and spread it all.

Work VERY well. I restored a large fountain that was ready to be tossed. Research on line, though. Fill all cracks with cement filler first before paint application. Then I took a wire brush to clean, then wash and dry. Left for days to make sure was well dried out. It is very helpful to call the service number as not as complex as it seems in the instruction. I also had a smaller job than the mix ingredients and they gave me the recipe for smaller amount. Then had enough for three coats. Does a beautiful job!!

Meticulously cleaned/coated a concrete bird bath that had a small 1 mm. crack in it. Coated crack 3+ times, forcing product into tiny crack. Bath leaks one week later--product does not expand/contract enough for minor temperature changes.Furthermore, instructions state to apply in the morning. As another reviewed noted...as the day warms up, air expands when warm, so bubbles form even if in the shade. Might do better if applied as the temperature drops, that way it would be "sucked" into the concrete.Thick, hard to apply, but still runs down semi-vertical surfaces. Short application window. Messy.Glossy unattractive finish. Expensive. Leaks. Doesn't seal.Should have just sealed crack with $8 tube of silicone bath & tub, which I will now need to do...