Beckett Corporation All in One Nozzle Kit for Fr and G

Our little pond has raccoons visit frequently, and they tend to be a bit rough on the parts sometimes. We have a little ceramic waterfall feature and use the diverter valve to send water to it via a few feet of flexible tubing. The diverter valve has a tendency to break. The plastic on the bottom section of it is a bit thin. Unfortunately, just buying a replacement valve for our pump is not an easy or cost effective option. Every pump manufacturer seems to use a different diameter piping, and Beckett makes a number of different sizes itself, making just finding the correct replacement valve without buying a whole set of other parts challenging. I have tried to repair old diverter valves with mixed results. One thing that worked was finding a piece of PVC with an inner diameter that would fit snugly over the outer diameter of the bottom of the valve and the pipe leading up to it from the pump and then gluing them all together with PVC glue and/or epoxy (water weld type) putty (see image). But just in case the raccoons break that assembly, I bought this kit for the diverter valve. Alas.

Ordered to replace 15 year old parts. Works nicely, brought new life back to the pond.

There were a lot of pieces but my G325 pump (more than 10 yrs. Old) has a threaded nipple coming out of the pump. unfortunately the 1/4” “self threading” pump outlet adapter didn’t thread tight enough to support the weight of the tubes and nozzle and kept falling off. Fortunately the original still works. Unfortunately the new tubes were larger than original ones. I had to improvise and use a sprinkler riser to connect the old with new. Everything else is good. Maybe include a threaded one to work on older Beckett pumps. Otherwise a good value and I don’t have to return

I bought this because I needed a new kit that fit the new pump (TotalPond MD11500 500GPH) as my other pump used the half inch type. But, mostly, I bought this particular one, after perusing many alternative kits, because of it's tiered spray head and two-way inline valve. The tiered spray head is unlike most others I've seen in that even though it has less spout openings, the openings are much larger than the other heads thereby providing a thicker spray - it's the only head I use as I don't care much for the bubbler or waterbell look. The tiered spray head is also very easy to clean and because of the size of its openings, doesn't get easily clogged by small debris like the typical tiered spray heads do. The two-way inline valve is excellent, but possibly not perfect as it does not fully shut off water in the horizontal valve. The two valves are easy to adjust and can be adjusted in tandem with each other and the pump flow control to achieve the desired height and flow. I'd buy it again just for the inline flow control and tiered spray head.

This is the worst. I had an old Beckett nozzle with diverter that directly screwed onto the old pump. This kit was supposed to work with our new Beckett G210AG 210 GPH Small Pond Pump but it won't even screw on. You have to try to force thread a coupler piece onto the pump outlet. Unfortunately the pump outlet is so flimsy that the thread on it started to strip versus creating a thread on the coupler.. I resorted to using our old nozzle and diverter on the new pump. Quite frankly this product is a joke and it would cost me more to return it than to eat the cost. The goofy thing is that if you attempt to interconnect the pipes to the diverter they don't even fit snuggly. In order to interconnect the pieces you would have to get creative.I loved the pump, filter box and nozzle/diverter that I have had for over 10 years, but it appears that Beckett no longer tests there products and/or buys the parts from overseas vendors.I believe that this will be the last Beckett items that I purchased. The new pump was also a joke compared to the Beckett model from 10 years ago.BEWARE!

I was putting the replacement part, that I needed, on and it broke. Not well made pieces.

I bought this along with the filter. I like it it gives a whole other look if you change the tips occasionally

The only negative I have - I wish it was made in America! Aside from the fact that would employ Americans, the instructions were really poorly written. I was totally lost, and even my plumber nephew could not follow the instructions and simply played with fittings until it attached to the pump. These instructions need to be written by the American company, not the Chinese manufacturer, please!!! It has a nice flow, once connection was figured out.

I had to McGyver this kit to fit the pump I bought, but it is fabulous! Once you are sure you have the right fittings, this is a great little accessory with different heads for your pond.

Atachements give a great variety of water falls.

Went to put the valve on the pump and it split open haven’t tried anything else yet

Was sold this as a recommended add on to a pond pump I had purchased. Great idea so I thought, until it arrived it nowere fits the pump we bought. When I called beckett they informed there was no compatibility between the two.Really disappointed!!

A good deal on quality parts.