3M Perforated Trim Masking Tape 06348, Molding Paint Protection, Trim Lifting Tape, Hand Tearing, 15 mm Hard Band, 50.8 mm x 10 m

We purchase this product about every 4-6 months for our business. Great value.

Buena

Love this stuff

Great product Works as it should

If you're painting a car with glass in place, as most of us at-home folks do, you need to buy this. It's definitely not cheap, so try to use it wisely. That said, it can totally make the job -Just think of the hundreds (thousands) you're saving if doing it yourself.Way it works is this: The roll spits out the top of the box and you're presented with this blue tape with a white piece of paper stuck to it's adhesive. Use scissors or a very sharp razor blade to cut this stuff as you absolutely can't tear it. You then stick the thicker blue exposed portion under the molding/trim/what-have-you and with gentle pressure lift away from the panel. At which point you remove the backing paper and stick it down. The corners can be especially tricky, definitely use a dedicated piece just for them. Lots of dirt and contaminates get trapped in there, so make sure to blow it out and clean it good with wax and grease remover.I used to be a professional autobody painter, this stuff is SOP anytime insurance or the customer won't pay to R/R a piece of glass.

I liked how it works, but the glue wont hold longer.Ive used to paint my car, but in the next day the tape was loose and the rubbers touching the fresh paint

I have been using this for years. Excellent for pulling back rubber/vinyl glass moldings that are not removeable for paint.

3M makes a great product shipped quickly.