Vision 20W Laser Engraver, Auto-Lifting for 5.5" Material, Smart Camera for Easiest Positioning, 600mm/s Speed, Laser Engraving Machine for Tumblers Metal Wood Acrylic DIY Craft Gifts Making

great company to deal with came as advertised so easy to set up was using it in 15 mins after receiving it. so much fun to use. great price for all of the attachments that come with it.

Doing a great job for me. I've done quite a few tumblers with great results. Started doing mandalas also with great results. I've been watching the cable to the laser head and there is no fraying of the webbing or problems so far. I intend to use light burn software in the future. I think Wecreat is going to have to do a tune up on compatibility. Clackshack on YouTube used light burn when he tested this unit and had to use the red marker light due to camera problems. So far I'm completely happy. I expect some updates from Wecreate as they seem to be pretty consistent. As far as speed and power this thing shines.

There are some Integration Issues with LightBurn but they appear to be continuing to work on that integration. There is a thread by "workabyte" on the LightBurn forum that discusses a few of the items.Overall VERY Happy and Would Buy Again though I would likely get the 20W and save some money on it# The Bullets:- Initial setup is a breeze, 10 min hardware, 5 min software and you are ready to create something- the project used does take a long time to process but also fun to watch the image realized- Auto focus and height adjustment is AMAZING and so stress reliving.- WeCreat Software processes images REALLY well and overall, very easy to use. I do have some exposure to Sign Software, so it feels a little familiar.- Material presets are VERY easy to pick from and configure with visual examples of what to expectPROPER VENTING IS IMPORTANT!!!!I have a vent connection for my window that this was running through, but my small office space did still have a fairly strong smell, may consider the air purifier if this is consistent (I have only created one item thus far)---# Details,### Setup: 10 minsupper simple and easy to follow instructions. Nearly zero assembly, plug in air assist, plug screw on vent port and attach hose, plug in the power and you are done.### Software Setup and ProcessingInitial setup takes you through it all, I am a 100% new to laser engraving and cutting. The free software they provide has a great step by step guide and when you are done you have created something using both cuts and their amazingly simple image to engraving profile (this is going to be a lot of fun). You are also exposed to their "project store" where there is a plethora of ready to go projects that you can just load and burn.### 1st Custom Project In 30 min.I have already used this to create a wood "challenge coin" on one of the sample/test pc of wood that comes in the box. I imported an image, crated cut lines, and added text in about 15 min.The Auto Focus camera for me is a must have, this unit cost a little more than the xTool I tried out but just ease of setup and knowing exactly what the end result is going to look like is 1000% worth it. Completely removed the guess work and fear of "Fn It Up". For my challenge coin I was about to measure it and try to crate a cut circle line and then once the image loaded up all I had to do was draw the circle around it and TaDa!---### Considerations:- xTool S1 does have a method for capturing your material and importing it to your project, it requires a cell phone with the app and doesn't feel as accurate/safe even though it worked fairly well. just extra steps that I am happy to not take.- xTool S1 has a larger bed size as far as X,Y but to get comparable height you must use an additional attachment adding and removing could be a PITA if you change project types frequently.- this is a hobby item for me so I plan on just throwing in whatever feels like fun and customizing it---# More to come:I have not received the IR attachment yet, looking forward to that and will update once I have received.

1st laser bought its a learning experience and process have to be patient and expect to have alot of test items that you botched but lots of videos and support groups with advice and just dial what works for you

Absolutely in love with my machine it's the greatest thing you can engrave and laser there's so much things you can do I haven't stopped using it since I got it, I am really impressed on how the wecreate does so many things easy to assemble and easy to make your items and it's most definitely a money maker.

Buyer beware if you are getting this for use with Lightburn. Although they say it supports Lightburn I have to question that. My experience was not good using Lightburn. It started with the camera alignment which does not work properly. When you run the alignment wizard in Lightburn when the machine engraves the pattern it raises to the highest z position making it way out of focus. I loaded the latest version of firmware on the laser and Lightburn and set the z offset for all layers as recommended but still it always did the same thing. Moving on from the camera I attempted to engrave a fairly simple material test card I use for all of my other lasers. The machine will engrave for about 10-20% of the job and then stop/freeze. The only thing you can do at that point is to power it off and on to reset. I opened a case with Wecreat support and they were not helpful. They only gave basic recommendations which I had already done and then recommended I go to Lightburn for support. The issue is not Lightburn as I have other lasers that work just fine with Lightburn and the file. They also suggested using Wecreat software but compared to XCS and Lightburn I find it very lacking in features and not adequate for the work I do. In the end I decided to return it for a refund.

Great addition to my projects. Love this machine.